Lincoln Electric K2343-3 Eagle™ 10,000 Plus Engine Driven Welder

Brand New


this item condition is new

Special Order


usually ships within 10-15 business days
CA$6,739.99
Model No: K2343-3
Website Product ID: 16402

Features

  • Make Work Fly with an Eagle™ 10,000 Plus! A great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Eagle™ 10,000 Plus does a variety of basic welding jobs. And with 10,500 watts of surge AC generator power, it handles a variety of other jobs: lights, grinder, Lincoln Electric inverter, plasma cutter (separate air supply needed) or emergency power.
  • .
  • Top-of-the-line OHV engine: Kohler ® Command ® 23 HP CH730
  • Three engine doors provide machine protection and easy service access
  • Easy to Maintain – Engine requires an oil change only every 100 hours and every 200 hours for the oil filter
  • Electric Start Switch for easy starts. Switch combines OFF, START, and IDLER functions into one simple, compact, easy to use switch
  • Circuit breaker on the 12V battery circuit provides added component protection
  • Convenient truck or trailer mounting with front and rear holes in base
  • Fuel level slots in both sides of the base with a decal to easily read the fuel level in the tank. Helps you avoid running out of fuel during critical jobs
  • Large top fuel filler neck is easily accessed for refueling
  • Oil drain valve (no tools required) with removable extension tube
  • Processes Stick, TIG, MIG, Flux-Cored, Gouging
  • Applications: Construction, Maintenance and Repair, Ranch/Farm
  • .
  • Recommended Accessories:
  • General Options: Power Plug Kit (20 amp), Full-KVA Adapter Kit, GFCI Receptacle Kit, Spark Arrester Kit, Canvas Cover (Large), All Terrain Undercarriage, Factory Undercarriage, Welding Gas Cylinder, LPG Tank Holder, Small Two-Wheel Road Trailer with Duo-Hitch, Fender and Light Kit, Cable Rack
  • TIG Options: PTA-26V TIG Torch (25 ft 2pc), Parts Kit, Square Wave™ TIG 175 TIG Welder
  • Wire Feeder Options: EasyMIG® 180 Welder, Magnum® PRO 100SG Spool Gun
  • Plasma Cutting Options: Tomahawk® 1000 Plasma Cutter w/ Hand Torch
  • .
  • Arc Performance:
  • Smooth DC welding output for a broad range of stick electrodes
  • Choose DC(+) for a deep penetrating arc or DC(-) for less penetration on thin sheet metal
  • Rated 225 amps/25 volts/40% duty cycle and 210 amps/25 volts/100% duty cycle for CC. All rated outputs at 104°F (40°C)
  • Simple Output Range Selector can be used to select 1 of 3 amperage ranges with generous overlap for Stick/TIG welding
  • Fine adjustment control allows you to dial in just the right welding output for each application
  • Add productivity with self-shielded flux-cored wire welding in CC mode. Compatible with Lincoln Electric across-the-arc wire feeders for use with a variety of wire electrodes. For applications where weld quality and deposition properties are not critical
  • Expand to AC TIG welding with optional Square Wave ™ TIG 175 or Invertec ® V205-T AC/DC (powered by AC generator power from the Eagle ™ 10,000 Plus) for aluminum and other alloy welding
  • Arc gouge with up to 5/32 in. (4.0 mm) carbon electrode
  • .
  • AC Generator Performance:
  • 10,500 watts surge AC generator power. Most surge power in its class. Use for motor starting.
  • 9,000 watts continuous AC generator power. For high capacity needs such as a back-up generator, powering a Tomahawk ® 1000 plasma cutter, an Invertec ® inverter welder or a Square Wave ™ TIG 175 welder. Also for lights, a grinder or other power tools
  • Delivers up to 38 amps from the single 120V/240V full-KVA receptacle. Standard circuit breakers protect the machine as well as your power tools
  • Delivers up to 40 amps from two 120V duplex receptacles
  • Get two tools in one when you use the Eagle ™ 10,000 Plus as a power generator for emergency standby power, and/or for welding
  • Optional GFCI (Ground Fault Circuit Interrupter) Kit available for additional protection from electrical shock for 120V receptacles
  • Simultaneous welding and AC generator power – power up to 3,950 watts while welding at 145 amps

Specifications

  • Rated Output : 225A DC CC/25V/40%, 210A DC CC/25V/100%
  • Output Range : 50-225A DC
  • Generator Output : 10,500 W Surge, 9,000 Continuous
  • Type of Engine : Kohler® OHV (4) Command CH730
  • HP and Speed : 23 @ 3600 RPM
  • Cylinders : 2
  • Dimensions (H x W x D) : 29.9 in x 21.5 in x 42.3 in
  • Weight : 514 lbs.

Includes

  • (1) Lincoln Electric Eagle™ 10,000 Plus Engine Driven Welder (K2343-3)
  • (1) 20 ft. (6.0 m) of #2 electrode cable
  • (1) Electrode Holder
  • (1) 15 ft. (4.5 m) of #2 work cable and work clamp