Lincoln Electric K52010-0505 SEAM TRACKER™ 450 5 X 5 STANDARD SYSTEM ONE-PAK®

Pictures are only for respresentation, actual product may vary, the Model #/SKU/Part number listed above is what you will receive

Brand New

this item condition is new

usually ships within 10-15 business days

CA$44,959.99

Model No: K52010-0505

Website Product ID: 38249

Operators can quickly learn to program and operate.
Select the desired level of automation – one of two controllers and matching pendants.
Choose a cross slide assembly based on load capacity required to handle the weight of the welding drive components.
Determine the travel stroke length of each axis necessary to complete the weld.
Select the application-specific seam sensor tip.
Advanced Controls Available - Gain these additional capabilities with the Advanced Programming Control (APC)
Program the entire sequence of the weld cycle as a position-based or time-based configuration.
Store up to 19 weld sequence programs.

LOAD CAPACITY : 250 lb (113 kg) @ 12 in (305 mm) from faceplate 450 lb (204 kg) @ 24 in (610 mm) from faceplate
INPUT POWER : 120/230/1/50/60
STANDARD STROKE LENGTHS : 5 x 5 in (127 x 127 mm)
MINIMUM ENVELOPE STROKE : 10 x 10 in (127 x 127 mm) stroke = 22.5 in (572 mm) diameter
TRACKING ACCURACY : Within 0.005 in (0.127 mm)
TRAVEL SPEED : 17 ipm (0.43 m/min) max
TRACKING CONTROLS : Automatic Control with Seam Sensor or Manual Up/Down and Left/Right with Pendant

(1) Lincoln Electric SEAM TRACKER™ 450 5 X 5 STANDARD SYSTEM ONE-PAK® (K52010-0505)
(1) Standard Control
(1) Standard Pendant w/ 10 ft (3 m) Cable
(1) Cable 4 ft (1.2 m)
(1) Cable 10 ft (3 m)
(1) CS450 Cross Slide 5 x 5 (127 x 127)
(1) Seam Sensor Assembly
(1) Five Axis Probe Bracket
(1) Weld Torch Mounting Kit
(1) Sensor Insulator
(1) Seam Sensor Tip PT012 1/8 in (3.2 mm)